References

1. ISO 5436-2 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards. International Organization for Standardization, 2001.

2. ISO 3274 (1996) Geometric Product Specifications (GPS) - Surface texture: Profile method - Nominal characteristics of contact (stylus) instruments.

3. ISO 5436-1 (2000) Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures.

4. ISO 4287 (1997), Geometrical Product Specifications (GPS) Surface texture. Terms Definitions and Surface texture Parameters.

5. ISO 4288-1996 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture.

6. (ISO 11562 – 1996) sd Geometric Product Specifications (GPS) - Surface texture: Profile method Metrological characteristics of phase correct filters.

7. M Krystek Die digitale Implementierung des Profilfilters nach DIN EN ISO 11562, Beuth-Verlag, Berlin.

8. J. K. Brennan, A. Crampton, X. Jiang, R. Leach, P Harris. Reconstruction of continuous surface profiles from discretely sampled data, Proc Int Conf EUSPEN Montpellier France May 2005.

9. P.Scott, Pattern analysis and metrology: the extraction of stable features from observable measurements, Proc R. Soc. Lond A, 460, (2004) p2845-2864.

10. X. Chen and W.B. Rowe. Analysis and Simulation of the Grinding Process - Part I, Generation of the Grinding Wheel Surface. International Journal of Machine Tools and Manufacture, 1996, 36(8), 871-882.

11. X. Chen and W.B. Rowe. Analysis and Simulation of the Grinding Process - Part II, Mechanics of Grinding. International Journal of Machine Tools and Manufacture, 1996, 36(8), 883-896.

13. X.W. Liu K Cheng, D Webb and X C Luo “ Improved Dynamic Cutting Force Model in Peripheral Milling - Part I: Theoretical Model and Simulation”. Int. Jnl. of Advanced Manufacturing Technology, 2002, 20(9), 631-638.

14. X.W. Liu K Cheng, D Webb, A Longstaff, M Widiyarto. “Improved dynamic cutting force model in peripheral milling – Part II: experimental verification and prediction”, Int. Jnl. of Advanced Manufacturing Technology, 2004, 24(11-12), 794-805.

15. J.J. Wu. Simulation of rough surfaces with FFT. Tribology International, 2000, 33, 47–58.

16. J.J. Wu. Simulation of non-Gaussian surfaces with FFT. Tribology International, 2004, 37, 339–346.

17.BIPM, IEC, IFCC, ISO, IUPAC, IUPAP and OIML. Guide to the Expression of Uncertainty in Measurement. ISBN 92-67-10188-9, second edition, 1995.

18.M.G. Cox and P.M. Harris. Software Support for Metrology Best Practice Guide No. 6: Uncertainty Evaluation. National Physical Laboratory, UK, March 2004.

19 M.G. Cox and P.M. Harris. Software specifications for uncertainty evaluation. Technical Report CMSC 40/04, National Physical LaboratoryUK, March 2004.

20.R.L. Burden, J.D. Faires and A.C. Reynolds. Numerical Analysis. Prindle, Weber and Schmidt, Massachusetts, second edition, 1981.

21 W.H. Press, S.A. Teukolsky, W.T. Vetterling and B.P. Flannery. Numerical Recipes in FORTRAN: The Art of Scientific Computing. Second Edition, Cambridge University Press, 1992.

22. Ralston and P. Rabinowitz. A First Course in Numerical Analysis. McGraw-Hill, New York, second edition, 1978.

23. G.Wichmann, Parkin and R. Barker. Software Support for Metrology Best Practice Guide No.1: Validation of Software in Measurement Instruments. Technical Report, National Physical Laboratory, UK, 2004.