MTDATA – Phase Diagram Software from the National Physical Laboratory

 

 

 

Home 

News 

Products 


Training and Support 

FAQs 

Links 

Agents 

Other Services 

 

Services 

 

 

MTDATA References from Users

The following are references to work involving MTDATA or other work that may be of interest.

Tailoring of Ostwald ripening behaviour in multicomponent Al alloys.
Rivera Diaz del Castillo, P.E.J., Reischig, P., van der Zwaag, S., Scripta Materialia, Volume 52, Issue 8 , April 2005, Pages 705-708

Precipitation of M23C6 carbides: thermoelectric power measurements.
Caballero, F.G., Garcia-Junceda, A., Capdevila, C., de Andres, C.G., Scripta Materialia, Volume 52, Issue 6 , March 2005, Pages 501-505

Simulation of the columnar-to-equiaxed transition in directionally solidified Al-Cu alloys.
Dong, H.B., Lee, P.D., Acta Materialia, Volume 53, Issue 3 , February 2005, Pages 659-668

Microstructural characterization of autogenous laser welds on 316L stainless steel using EBSD and EDS.
J. Kell, J. R. Tyrer, R. L. Higginson and R. C. Thomson, Journal of Microscopy, Volume 217 Issue 2 Page 167, February 2005

An accurate semi-empirical equation for sputtering yields I: for argon ions
M. P. Seah , C. A. Clifford, F. M. Green, I. S. Gilmore, Surface and Interface Analysis, Volume 37, Issue 5 , Pages 444 - 458. Feb 2005

Disagglomeration in thixoformed wrought aluminium alloy 2014.
Liu, D., Atkinson, H.V., Higginson, R.L., Materials Science and Engineering: A, Volume 392, Issues 1-2 , 15 February 2005, Pages 73-80

Copper and Chromium Electrodialytic Migration in CCA-Treated Timber Waste
Virkutyte, J. Velizarova, E. Ribeiro, A. B. SillanpÄÄ, M., Water Air and Soil Pollution 2005 Vol 160; Number 1-4 , page(s) 27-39

Formation of eutectic intermetallic rosettes by entrapment of liquid droplets during cellular columnar growth.
Alexander, D.T.L., Greer, A.L., Acta Materialia, Volume 52, Issue 20, 1 December 2004, Pages 5853-5861

Morphology changes in solder joints--experimental evidence and physical understanding.
Muller, W.H., Microelectronics Reliability, Volume 44, Issue 12 , December 2004, Pages 1901-1914

Transmission electron microscopy of high pressure metal dusted 316 stainless steel
Stevens, K.J., Levi, T., Minchington, I., Briggs, N., Keast, V., Bulcock, S., Materials Science and Engineering: A, Volume 385, Issues 1-2 , 15 November 2004, Pages 292-299

Dissolution behavior of alumina micro-particles in CaO-SiO2-Al2O3 liquid oxide
Monaghan, B.J., Chen, L., Journal of Non-Crystalline Solids, Volume 347, Issues 1-3, 1 November 2004, Pages 254-261

Proposal of an empirical formula for the austenitising temperature.
Capdevila, C., Garcia-Mateo, C., Caballero, F.G., Andres, C.G.d., Materials Science and Engineering: A, Volume 386, Issues 1-2 , 25 November 2004, Pages 354-361

Formation of nanostructured steels by phase transformation.
Yokota, T., Garcia Mateo, C., Bhadeshia, H.K.D.H., Scripta Materialia, Volume 51, Issue 8 , October 2004, Pages 767-770

Design of new Fe-9CrWV reduced-activation martensitic steels for creep properties at 650 °C
De Carlan, Y. Murugananth, M. Sourmail, T. Bhadeshia, H. K., Journal of Nuclear Materials 2004 vol 329-333; Issue 1 , page(s) 238-242

The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys.
Quested, T.E., Greer, A.L., Acta Materialia, Volume 52, Issue 13 , 2 August 2004, Pages 3859-3868

A nonlocal diffuse interface model for microstructure evolution of tin-lead solder
Ubachs, R.L.J.M., Schreurs, P.J.G., Geers, M.G.D., Journal of the Mechanics and Physics of Solids, Volume 52, Issue 8 , August 2004, Pages 1763-1792

The Role of Inclusions and Austenite Grain Size on Intragranular Nucleation of Ferrite in Medium Carbon Microalloyed Steels.
Capdevila, C; Caballero, F G; Garcia-Mateo, C; De Andres, C G, Materials Transactions. Vol. 45, no. 8, pp. 2678-2685. Aug. 2004

A concise model for mixed-mode phase transformations in the solid state.
Sietsma, J., van der Zwaag, S., Acta Materialia, Volume 52, Issue 14 , 16 August 2004, Pages 4143-4152

Nucleation theory for high-carbon bainite.
Garcia-Mateo, C., Bhadeshia, H.K.D.H., Materials Science and Engineering: A, Volume 378, Issues 1-2 , 25 July 2004, Pages 289-292. European Symposium on Martensitic Transformation and Shape-Memory

Growth-restriction effects in grain refinement of aluminium.
Quested, T E; Greer, A L, Light Metals 2003 as held at the 132nd TMS Annual Meeting; San Diego, CA; USA; 2-6 Mar. 2003. pp. 945-952. 2003

Optimization of methods of complex alloy additions development for welding materials and manufacture.
Bord, N J; Sheleg, V K; Radchenko, A A, Biuletyn Instytutu Spawalnictwa. Vol. 47, no. 5, pp. 101-105. 2003

The impact of silica to a SiO2 -MgO-FeOx slag.
Karlemo, B J W; Taskinen, P A, Scandinavian Journal of Metallurgy. Vol. 31, no. 5, pp. 307-313. Oct. 2002

Ferrite/pearlite band formation in hot rolled medium carbon steel.
Offerman, S E; Van Dijk, N H; Rekveldt, M T; Sietsma, J; Van Der Zwaag, S, Materials Science and Technology. Vol. 18, no. 3, pp. 297-303. Mar. 2002

In-situ high-temperature x-ray diffraction on the gamma -> alpha transformation in low-carbon steels.
Bodin, A; Woning, L; Sietsma, J; Van Der Zwaag, S, ISIJ International. Vol. 42, no. 1, pp. 94-99. 2002

Investigation of the wetting characteristics of chromium based active braze alloys on silicon nitride.
Winn, A; Derby, B; Hayes, F, Key Engineering Materials. Vol. 206-213, pp. 511-514. 2002

Some aspects of Ni behaviour in PWR primary coolant.
Nuclear Energy, S. Dickinson, J. Henshaw, HE Sims and K. Garbett, 2001, 40, No. 1, Feb., 47-51,

Modelling and exprimental verification of minor phase composition changes in creep resistant 12CrMoVNb steels.
Strang, A; Vodarek, V, Parsons 2000: Fifth International Charles Parsons Turbine Conference; Cambridge; UK; 3-7 July 2000. pp. 572-589. 2000

The use of inclusion analyses in the development of clean steels.
Dyson, D J; Rose, A J; Whitwood, M M; Wilcox, D P, Clean Steel 5: Fifth International Conference on Clean Steel, Vol. 2; Balatonfured; Hungary; 2-4 June 1997. pp. 68-78. 1997

Comparison of observed and predicted equilibrium PAH concentrations in coke oven emissions - I. Relative abundances of carbon-hydrogen PAH
Thompson, D. Chemosphere 1997 Vol 35; Number 3 , page(s) 597-606

Purification of remelted aluminum packagings.
Nijhof, G H; van der Donk, H M; Castelijns, C A M; Bouvet, S; Bertaud, Y, Light Metals 1996; Anaheim, California; USA; 4-8 Feb. 1996. pp. 1065-1069. 1996

Solidification of austenitic stainless steels.
Allan, G K, Ironmaking and Steelmaking. Vol. 22, no. 6, pp. 465-477. 1995

Reactions of Aluminium and Silicon in MgO-Graphite Composites and Prediction of Phase Constitution using MTDATA
Artir, R; Lee, W E; Argent, B B; Larsen, P H, High Temp.Mater.Sci. Vol. 34, no. 1/3, pp. 69-103. 1995

Thermodynamic calculations for the growth of alumina by directed melt oxidation
Guillard, FJAH; Hand, R J; Lee, W E; Argent, B B, High Temperature Materials Chemistry; London; England; 28-29 Oct. 1993. pp. 161-173. 1995

Phase Equilibria Predictions by Computational Calculations on Portland Cement Clinker
Ghanbari Ahari K, Thompson D, Argent B B, Sharp J H, Key Engineering Materials, 2004, vols. 264-268, 2131-2136

Thermoelectric power studies on a martensitic stainless steel
Caballero F G, Capdevila C, Alvarez L F, Garcia de Andres C, Scripta Materialia, 2004, 50(7), 1061-1066

Fate of trace contaminants from biomass fuels in gasification systems
Kilgallon P et al, Energy Technology, 2002, 21, 903–912

Gas turbines: Gas Cleaning Requirements for Biomass-Fired Systems
Oakey J, Simms N, Kilgallon P, Materials Research, 2004, 7(1), 17-25

Investigations of the structure and stability of alternative gate dielectrics
Stemmer S, Chen Z Q, Lysaght P S, Gisby J A, Taylor J R, Proceedings of the "Seventh International Symposium on Silicon Nitride and Silicon Dioxide Thin Insulating Films", 203rd Meeting of The Electrochemical Society, Paris 2003

Formation of chromium borides in quenched modified 310 austenitic stainless steel
T. Sourmail, T. Okuda and J. E. Taylor, Scripta Mater. 50:2004, 1271-1276

Thermodynamic and Kinetic Behaviour of Materials in Micro Joints Formed with Sn-Pb and Pb free Solders
Huang Z, Conway P P, Liu C, Thomson R C, Proceedings of EMAP 2003 (International Symposium on Electronic Materials and Packaging), Singapore, 17th November 2003, pages 33-40, ISBN 981-05-0078-5 (Winner of Cookson Electronics Paper Award)

Development of Hard Bainite
IC. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia, ISIJ International, Vol. 43 (2003), No. 8, pp. 1238–1243

Design of creep-resistant steels: success and failure of models
H. K. D. H. Bhadeshia and T. Sourmail, Japan Society for the Promotion of Science, 2003:44, p299-314

Sensitisation and Evolution of Chromium-depleted Zones in Fe-Cr-Ni-C systems
T. Sourmail, C.H. Too, H.K.D.H. Bhadeshia, ISIJ Int., 2003:11, p1814-1820

Modelling simultaneous precipitation reactions in austenitic stainless steels
CALPHAD, 27 (2003) 169–175, T. Sourmail, H.K.D.H. Bhadeshia

Neural network model of creep strength of austenitic stainless steels
T. Sourmail, H. K. D. H. Bhadeshia and D. J. C. MacKay, Materials Science and Technology Vol. 18, 2002, pp. 655-663.

Die attach solder design Calculation of phase diagrams for lead-free power IC die attach
Lalena, J. N. Weiser, M. W. Dean, N. F. Advanced Packaging 2002 Vol 11; Part 2 , page(s) 25-32 Pennwell 1065-0555

A Critical Comparison of LTE vs. Kinetic Approaches in the Modeling of Lamp Chemistry
Keer-Rendon, A. Powell, N. Wilson, G. Devonshire, R. International Symposium on the Science and Technology of Light Sources 2001 9TH , page(s) 103:P Greifswald; Institute for Low-Temperature Plasma Physics; 2001

Theoretical design of ferritic creep resistant steels using neural network, kinetic, and thermodynamic models
F. Brun, T. Yoshida, J. D. Robson, V. Narayan, H. K. D. H. Bhadeshia, and D. J. C. MacKay, Materials Science and Technology May 1999 Vol. 15 547

Stability of retained austenite in TRIP-assisted steels
M. Y. Sherif, C. Garcia Mateo, T. Sourmail and H. K. D. H. Bhadeshia, Materials Science and Technology March 2004 Vol. 20, 319

Constitutive Modelling of Metastable Steels
K. Datta, M. Hommes, J. Post, H. J. M. Geijselaer1, J. Huétink1 and J. Beyer. 7th Esaform Conference, ESAFORM 2004, Trondheim, Norway, 28-30 April 2004

A Model for Ferrite/Pearlite Band Formation and Prevention in Steels
P.E.J. Rivera-Diaz-Del-Castillo, J. Sietsma, and S. Van Der Zwaag, Metallurgical and Materials Transactions A, Vol. 35A, February 2004, 425

Acceleration of Low-temperature Bainite
C. Garcia-Mateo, F. G. Caballero and H. K. D. H. Bhadeshia, ISIJ International, Vol. 43 (2003), No. 11, pp. 1821-1825

Modelling and characterisation of Mo2C precipitation and cementite dissolution during tempering of Fe -C-Mo martensitic steel
S. Yamasaki and H. K. D. H. Bhadeshia, Material Science and Technology, 2003, 19, 723

Modelling and characterisation of V4C3 precipitation and cementite dissolution during tempering of Fe -C-V martensitic steel
S. Yamasaki and H. K. D. H. Bhadeshia, Material Science and Technology, 2003, 19, 1335

Silicon-Rich Bainitic Steel Welds
H. K. D. H. Bhadeshia, M. Lord and L.-E. Svensson, Proceedings of International Conference: Joining & Welding Solutions to Industrial Problems, JWRI, Osaka University, 2003, pp. 43-52

Model for the maximum fraction of retained austenite in austempered ductile cast iron
M.A. Yescas, H.K.D.H. Bhadeshia, Materials Science and Engineering, A333, 2002, 60-66

Modelling Simultaneous Alloy Carbide Sequence in Power Plant Steels
N. Fujita and H. K. D. H. Bhadeshia, ISIJ International, Vol. 42 (2002), No. 7, pp. 760-769

Modelling precipitation of niobium carbide in austenite: multicomponent diffusion, capillarity, and coarsening
N. Fujita and H. K. D. H. Bhadeshia, Materials Science and Technology, 2001, 17, 403

Estimation of the amount of retained austenite in austempered, ductile irons using neural networks
M.A. Yescas, H.K.D.H. Bhadeshia, D.J. MacKay, Materials Science and Engineering A311 (2001) 162-173

Freeze layers in smelting processes
Campbell A P, Pericleous K A, Cross M, ECCOMAS Computational Fluid Dynamics Conference 2001, Swansea, Wales, UK, 4-7 September 2001

The effects of Al and Si additions on the microstructures of precipitates in low carbon steels containing Sn
X. Li, A. Watson, R. Brydson, A. Jha and R. C. Cochrane, Journal of Materials Science, 35 (5): 1051-1064, March 1 2000

Compositional changes in minor phases present in 12CrMoVNb steels during thermal exposure at 550°C and 600°C
V. Vodarek and A. Strang, Materials Science and Technology, 2000, 16(10), 1207-1213

Modelling microstructural evolution and mechanical properties of austempered ductile iron
R. C. Thomson, J. S. James and D. C. Putman, Materials Science and Technology, 2000, 16,1412-1419

Effect of niobium and titanium on tin precipitation in Fe alloys
X. Li, A. Watson, R. Brydson, A. Jha and R. C. Cochrane, Materials Science and Technology, 1999, 15, (9), 1001-1008

Design of Creep-Resistant Steel Welds
H. K. D. H. Bhadeshia, Trends in Welding Research, eds. S. A.David, T. DebRoy, J. A. Johnson, H. B. Smartt and J. M. Vitek, ASM International, Ohio, 1999, 795-804

Bayesian Neural Network Model for Austenite Formation in Steels
L. Gavard, H. K. D. H. Bhadeshia, D. J. C. MacKay and S. Suzuki, Materials Science and Technology, Vol. 12 (1996) 453-463

A computer modelling approach to predicting the long term thermal stability of Co-Pd magnetic multilayers
Smith, G.D.W., Usherwood, T.W. and Mackenzie, R.A.D., Journal of Magnetism and Magnetic Materials, Sep 1996

A phase-field model coupled with a thermodynamic database
Qin R S, Wallach E R, Acta Materialia, vol. 51, issue 20, 8 December 2003, pages 6199-6210

Melting behaviour of oxide systems for heterogeneous transmutation of actinides. III. The system Am-Mg-O
Zhang, H., Konings, R.J.M., Huntelaar, M.E. and Cordfunke, E.H.P., Journal of Nuclear Materials, Dec 1997

Thermodynamic considerations in dibenzodioxin and dibenzofuran formation: Concentrations of chlorinated dioxins
Thompson D, Chemosphere, Dec 1994

An evaluation of the heat of formation of chlorinated dioxins and its application to isomer abundance predictions
Thompson D, Chemosphere, Dec 1994

Effects of thermal history and microstructure on phosphorus and manganese segregation at grain boundaries in C-Mn welds
Maier P, Faulkner R G, Materials Characterization - New York - 2003, vol. 51, no. 1, pages 49-62, Elsevier Science B.V., Amsterdam. 1044-5803

Modeling the microstructure-mechanical property relationship for a 12Cr-2W-V-Mo-Ni power plant steel
Li, Q. Materials Science and Engineering A 2003 VOL 361; Number 1-2 , page(s) 385-391 Elsevier Science B.V., Amsterdam. 0921-5093

Coal blend combustion: fusibility ranking from mineral matter composition
Goni, C. Helle, S. Garcia, X. Gordon, A. Parra, R. Kelm, U.; Jimenez, R. Alfaro, G. Fuel -Guildford- 2003 Vol 82; Number 15-17 , page(s) 2087-2095 Elsevier Science B.V., Amsterdam. 0016-2361

Modelling the effects of alloying elements on precipitation in ferritic steels
Yin Y F, Faulkner R G, Materials Science and Engineering: A, Mar 2003

Determination of liquid fraction during solidification of aluminium alloys using a single-pan scanning calorimeter
Dong H B, Shin M R M, Kurum E C, Cama H, Hunt J D, Fluid Phase Equilibria, Sep 2003

Phase-field simulation of semisolid metal processing under conditions of laminar and turbulent flow
Qin R S, Wallach E R, Materials Science and Engineering: A, Sep 2003

Minor-phase composition changes in 12CrMoVNb steels during long-term exposure
Vodarek V, Strang A, Materials Chemistry and Physics, Aug 2003

Prediction of the distribution of trace elements between the product streams of the Prenflo gasifier and comparison...
Thompson D, Argent B B, Fuel, Mar 2002

In-situ study of pearlite nucleation and growth during isothermal austenite decomposition in nearly eutectoid steel
Offerman S E, van Wilderen L J G W, van Dijk N H, Sietsma J, Rekveldt M T, van der Zwaag S, Acta Materialia, Aug 2003

The origin of splitting phenomena in the martensitic transformation of stainless steels
Caballero F G, Alvarez L F, Capdevila, C., Garca de Andres, C., Scripta Materialia, Aug 2003

Cluster formation of pearlite colonies during the austenite/pearlite phase transformation in eutectoid steel
Offerman, S.E., van Wilderen, L.J.G.W., van Dijk, N.H., Rekveldt, M.T., Sietsma, J., van der Zwaag, S., Physica B, Jul 2003

The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing
Apps P.J., Bowen, J.R., Prangnell, P.B., Acta Materialia, Jun 2003

Thermodynamic predictions of wrought alloy compositions amenable to semi-solid processing
Camacho, A.M., Atkinson, H.V., Kapranos, P., Argent, B.B., Acta Materialia, May 2003

Modelling of microstructural effects in the fatigue of austempered ductile iron
Reed, P.A.S., Thomson, R.C., James, J.S., Putman, D.C., Lee, K.K., Gunn, S.R., Materials Science and Engineering: A, Apr 2003

Quasi-peritectic solidification reactions in 6xxx series wrought Al alloys
Sha, G., O'Reilly, K.A.Q., Cantor, B., Titchmarsh, J.M., Hamerton, R.G., Acta Materialia, Apr 2003

Extension of the N-model to predict competing homogeneous and heterogeneous precipitation in Al-Sc alloys
Robson, J.D., Jones, M.J., Prangnell, P.B., Acta Materialia, Mar 2003

Prediction of the effect of additives on slag resistance of Al2O3-SiO2-SiC-C bond phases in air
Chan, C.-F., Argent, B.B., Lee, W.E., Calphad, Mar 2003

Characterisation of thin silica films deposited on carbon fibre by an atmospheric pressure non-equilibrium plasma...
Brown, M., Hayes, P., Prangnell, P., Composites Part A: Applied Science and Manufacturing (Incorporating Composites and Composites Manufacturing), Oct 2002

Model for the maximum fraction of retained austenite in austempered ductile cast iron
Yescas, M.A., Bhadeshia, H.K.D.H., Materials Science and Engineering: A, Aug 2002

Isothermal grain coarsening of spray formed alloys in the semi-solid state
Manson-Whitton, E.D., Stone, I.C., Jones, J.R., Grant, P.S., Cantor, B., Acta Materialia, Jun 2002

Thermodynamic equilibrium study of trace element mobilisation under pulverised fuel combustion conditions
Thompson, D., Argent, B.B., Fuel, Feb 2002

The influence of nitrogen on the austenite/ferrite interface mobility in Fe-1at.%Si
Kop, T.A., Sietsma, J., van der Zwaag, S., Materials Science and Engineering: A, Jan 2002

The formation of diffusion coatings on some low-alloy steels and their high temperature oxidation behaviour: Part 1...
Jha, R., Haworth, C.W., Argent, B.B., Calphad, Dec 2001

The formation of diffusion coatings on some low-alloy steels and their high temperature oxidation behaviour: Part 2....
Jha, R., Haworth, C.W., Argent, B.B., Calphad, Dec 2001

Estimation of the amount of retained austenite in austempered ductile irons using neural networks
Yescas, M.A., Bhadeshia, H.K.D.H., MacKay, D.J., Materials Science and Engineering: A, Jul 2001

Computer modeling of the coarsening process in tin-lead solders
Li, L., Muller, W.H., Computational Materials Science, Jun 2001

Growth related metastable phase selection in a 6xxx series wrought Al alloy
Sha, G., O'Reilly, K., Cantor, B., Worth, J., Hamerton, R., Materials Science and Engineering: A, May 2001

Some experiences modelling the sigma phase in the Ni-V system
Watson, A., Hayes, F.H., Journal of Alloys and Compounds, May 2001

Electron beam surface melting of model 1200 Al alloys
Allen, C.M., Kumar, S., Carroll, L., O'Reilly, K.A.Q., Cama, H., Materials Science and Engineering: A, May 2001

Control of gasifier mercury emissions in a hot gas filter: the effect of temperature
Reed, G.P., Ergudenler, A., Grace, J.R., Watkinson, A.P., Herod, A.A., Dugwell, D., Kandiyoti, R., Fuel, Apr 2001

The modelling of fuel volatilisation in accident conditions
Manenc, H., Mason, P.K., Kissane, M.P., Journal of Nuclear Materials, Apr 2001

Modeling diffusional coarsening in eutectic tin/lead solders: a quantitative approach
Dreyer1, W., Muller, W.H., International Journal of Solids and Structures, Feb 2001

Incubation time of isothermally transformed allotriomorphic ferrite in medium carbon steels
Capdevila, C., Garca de Andres, C., Caballero, F.G., Scripta Materialia, Jan 2001

Non-thermal nuclear hyperfine populations in the products of a photodissociation reaction
Payne, D.S., Wilson, G.J., Devonshire, R., Chemical Physics Letters, Dec 2000

Trace element analysis of gasification plant samples by i.c.p.-m.s.: validation by comparison of results from two...
Richaud, R., Lachas, H., Healey, A.E., Reed, G.P., Haines, J., Jarvis, K.E., Herod, A.A., Dugwell, D.R., Kandiyoti, R., Fuel, Jul 2000

A study on the austenite-to-ferrite phase transformation in binary substitutional iron alloys
Wits, J.J., Kop, T.A., van Leeuwen, Y., Seitsma, J., van Der Zwaag, S., Materials Science and Engineering: A, May 2000

Field-dependent neutron depolarization study of the ferrite formation in medium-carbon steels
te Velthuis, S.G.E., van Dijk, N.H., Rekveldt, M.T., Sietsma, J., van der Zwaag, S., Acta Materialia, Mar 2000

A three-dimensional model for the development of the microstructure in steel during slow cooling
te Velthuis, S.G.E., van Dijk, N.H., Rekveldt, M.T., Sietsma, J., van der Zwaag, S., Materials Science and Engineering: A, Jan 2000

Comparison of predicted equilibrium nitrogen-, oxygen- and sulphur-containing organic species concentrations in coke...
Thompson, D., Fuel Processing Technology, Nov 1999

Transmutation of actinides in inert-matrix fuels: fabrication studies and modelling of fuel behaviour
Konings, R.J.M., Bakker, K., Boshoven, J.G., Hein, H., Huntelaar, M.E., van der Laan, R.R., Journal of Nuclear Materials, Aug 1999

Thermodynamic modelling of directed melt oxidation processing for ceramic matrix composites
Gu, X., Hand, R.J., Argent, B.B., Journal of the European Ceramic Society, Jun 1999

Neutron depolarization study of phase transformations in steel
van Dijk, N.H., te Velthuis, S.G.E., Rekveldt, M.T., Sietsma, J., van der Zwaag, S., Physica B, Jun 1999

Heat treatment of UDIMET 720Li: the effect of microstructure on properties
Jackson, M.P., Reed, R.C., Materials Science and Engineering: A, Jan 1999

Oxidation Protection Coatings for C/SiC based on Yttrium Silicate
Webster, J.D., Westwood, M.E., Hayes, F.H., Day, R.J., Taylor, R., Duran, A., Aparicio, M., Rebstock, K., Vogel, W.D., Journal of the European Ceramic Society, Dec 1998

A mathematical model for the dissolution kinetics of Mg2Si-phases in Al-Mg-Si alloys during homogenisation under...
Vermolen, F., Vuik, K., van der Zwaag, S., Materials Science and Engineering: A, Oct 1998

A coupled thermodynamic/kinetic model for diffusional processes in superalloys
Matan, N., Winand, H.M.A., Carter, P., Karunaratne, M., Bogdanoff, P.D., Reed, R.C., Acta Materialia, Aug 1998

Comparison of observed and predicted equilibrium PAH concentrations in coke oven emissions: I. Relative abundances of...
Thompson, D., Fuel and Energy Abstracts, Jan 1998

Comparison of observed and predicted equilibrium PAH concentrations in coke oven emissions: I. Relative abundances of...
Thompson, D., Chemosphere, Aug 1997

Melting behaviour of oxide systems for heterogeneous transmutation of actinides. I. The systems Pu-Al-O and Pu-Mg-O
Konings, R.J.M., Zhang, H., Huntelaar, M.E., Cordfunke, E.H.P., Journal of Nuclear Materials, Oct 1997

Solidification microstructures and calculated phase equilibria in the Ti-Al-Mn system
Butler C J, McCartney D G, Small C J, Horrocks F J, Saunders N, Acta Materialia, Jul 1997

Kinetics of precipitation in power plant steels
Robson, J.D., Bhadeshia, H.K.D.H., Calphad, Dec 1996

A computer modelling approach to predicting the long term thermal stability of Co-Pd magnetic multilayers
Smith, G.D.W., Usherwood, T.W., Mackenzie, R.A.D., Journal of Magnetism and Magnetic Materials, Sep 1996

Thermodynamics of rare earth element partitioning between clinopyroxene and melt in the system CaO-MgO-Al2O3-SiO2
Blundy, J.D., Wood, B.J., Davies, A., Geochimica et Cosmochimica Acta, Jan 1996

Wetting of titanium nitride and titanium carbide by liquid metals
Xiao, P., Derby, B., Acta Materialia, Jan 1996

The Thermodynamics and Phase Diagrams of the Cd-Hg and Cd-Hg-Te Systems
Silk, N.J., Watson, A., Bryant, A.W., Argent, B.B., J., Y., Chart, T.G., Calphad, Sep 1995

Thermodynamic and Phase Diagram Assessment of the Cd-Te and Hg-Te Systems
Yang, J., Silk, N.J., Watson, A., Bryant, A.W., Argent, B.B., Calphad, Sep 1995

Review of Heat Capacity Data for Tellurium
Rand, M.H., Argent, B.B., Davydov, A.V., Calphad, Sep 1995

Optimisation of the thermodynamic and phase diagram data in the ternary As-Ga-In system
Jain-Yun, S., Chatillon, C., Ansara, I., Watson, A., Rugg, B., Chart, T., Calphad, Jun 1995

Theory for reaustenitisation from ferrite/cementite mixtures in Fe-C-X Steels
Atkinson, C., Akbay, T., Reed, R.C., Acta Metallurgica Materialia, May 1995

The partitioning of substitutional solute elements during the tempering of martensite in Cr and Mo containing steels
Thomson, R.C., Miller, M.K., Applied Surface Science, Mar 1995

A binary database for III-V compound semiconductor systems
I. Ansara, C.Chatillon, H.L.Lukas, T.Nishizawa, H.Ohtani, K.Ishida, M.Hillert, B.Sundman, B.B.Argent, A.Watson, T.G.Chart, T.Anderson, CALPHAD, 1994, 18(2), 177.

Atom probe and STEM studies of carbide precipitation in 2sol14Cr1Mo steel
Thomson, R.C., Bhadeshia, H.K.D.H., Applied Surface Science, Apr 1993

APFIM studies on martensite tempering of Fe-C-Si-Mn low alloy steel
Babu, S.S., Hono, K., Sakurai, T., Applied Surface Science, Apr 1993

The Phase Diagrams and thermodynamics of the systems ZrO2-CaO-MgO and MgO-CaO
Yin Y, Argent B B, Submitted to J. Phase Equil. 1993.

The Phase Diagrams and thermodynamics of the systems ZrO2-CaO and ZrO2-MgO
Yin Y, Argent B B, Submitted to J. Phase Equil. 1993.

An assessment of phase diagram and thermodynamic properties of the Gallium-Indium-Antimony system
Janrong Y, Watson A, To be published 1993.

Reassessment of phase diagram and thermodynamic properties of the Al-Ga system
Watson A, CALPHAD, 1992, 16(2), 207-217.

Carbide precipitation in 12Cr1MoV power plant steel
Thomson R C, Bhadeshia H K D H, Metall. Trans. A, 1992, 23A, 1171-9.

Precipitation sequences during carburisation of Cr-Mo steel
Race J M, Bhadeshia H K D H, Mat. Sci. Technol., 1992, 8, 875-882.

Assessment of the Mg-Zn system
Agarwal R, Fries S G, Lukas H L, Petzow G, Sommer F, Chart T G, Effenberg G, Zeit. Metallkde., 1992, 83(4), 216-223.

Reactions of silicon and aluminium in MgO-graphite composites II - Reaction products
Mapiravana J, Argent B B, Rand B, Stahl und Eisen, 1991, 175-178.

Three dimensional characterization and modelling of spinodaly decomposed iron-chromium alloys
Hyde J M, Cerezo A, Hetherington M G, Miller M K, Smith G D W, Surface Science, 1991, 266, 370-377.

Role of sulphate decomposition in the emission and control of hydrogen sulphide from autocatalysts
Diwell A F, Golunski S E, Taylor J R, Truex T J, Catalysis and Automotive Pollution Control II, 1991, 417-423.

A direct study of grain boundary allotriomorphic ferrite crystallography
Babu S S, Bhadeshia H K D H, Mater. Sci. Eng., 1991, A142, 209-19.

Use and limitations of thermodynamics in predicting reactions in glass or ceramic systems
Argent B B, Rand B, SERAMIK '89, 1990, 179-190.

The Ga-Zn (Gallium-Zinc) system
J Dutkiewicz, Z Moser, L Zabdyr, D D Gohil, T G Chart, I Ansara, C Girard, Bull. Alloy Phase Diag., 1990, 11, 77.

Hayes F H, Hetherington M G, Longbottom R D, Mater. Sci. Technol., 1990, 6, 263.

A critical assessment of thermodynamic data for the Ga-In system
B C Rugg, T G Chart, Calphad, 1990, 14(2), 115.


 

Updated 7 May 2010